General Specifications

Mounting Location: Enclosure

Mount Type: Surface

Heater Type: Electric

Heat Output: 27 Btu/hr.

Maximum Area Heated @ Temperature Change: 3.5 cu. ft. @ 10° F / 1.75 cu. ft. @ 20° F / 1 cu. ft. @ 30° F / 0.75 cu. ft. @ 40° F

Wattage: 8 W

Current: 2 A

Voltage: 120 to 240V AC

Heating Method: Radiant

Radiant Heater Type: Open

Temperature Control Type: Without Built-In Control (No Thermostat)

OverallLength: 1 3/16"Height x 1"Depth x 1/2"

Heating Element Height: 1/2"

Surface Temperature: 300° F

Material: Clear Anodized Aluminum

Electrical Phase: Single Power Source Electric

Electrical Connection Type: Hardwire

Wire Connection Type: Wire Leads

Wire Lead Gauge: 18

Wire Length x 11 3/4"

Mounting Fasteners Included: No

Mounting: Holes - Number Of: 2

Diameter: 0.12"

Environment: Wet Location

Specifications Met: CE Marked, C-UL Recognized Component, UL Recognized Component

Description

Under 2 ½” long, these tiny heaters fit in tight spaces, such as security camera enclosures. For localized heat in a large enclosure, place them near batteries and other parts that don’t work well in the cold. These heaters create radiant heat, which spreads out in all directions without needing a fan. They also reduce humidity, preventing condensation that causes corrosion and short circuits.

Heaters run continuously—turn them on with a thermostat, humidistat, timer, or switch. Use a thermostat to control temperature or a humidistat to control moisture.

These heaters are rated IP32 to keep out objects the size of a screwdriver and drops of water falling from above. As UL and C-UL Recognized Components that are also CE Marked and VDE Certified, they meet American, Canadian, and European safety standards.

Mount these heaters in any position.

Downloads

636-545-Enclosure Heater - Dimensional Drawing.pdf